| Author |
Message |
Darth Bwon
Joined: 07 Feb 2013
Posts: 3
|
 Posted:
Thu Feb 07, 2013 4:24 am |
  |
Need some help here and sorry if I'm in the wrong place for it. I recentley bought a new humbucker pick up cover from greasygrooves.com and since putting it in it is squealing like crazy. I've tried putting electrical tape over the screws and the slugs since some of the wax fell off, but it is still doing the same thing. I need major help here. I'm not anywhere near a technician or a luthier. I would love any help that I can get. |
|
|
  |
|
Graunke
Joined: 03 May 2008
Posts: 6624
Location: Minnesota
|
| Posted:
Thu Feb 07, 2013 5:19 am |
|
|
  |
|
I M Evil
Joined: 04 Apr 2005
Posts: 2431
Location: Midwest, Sweden
|
| Posted:
Thu Feb 07, 2013 8:22 am |
|
EMGs does not squeal  |
_________________
"Spend less time chasing tones and more time just playing music." - Marty Friedman |
|
 |
|
Darth Bwon
Joined: 07 Feb 2013
Posts: 3
|
| Posted:
Thu Feb 07, 2013 3:33 pm |
|
| Graunke wrote: |
It proabbly needs to be wax potted. You can't just put covers on open humbucker coils without doing it properly.
Check you tube for tutorials on how to wax pot humbuckers. |
They were waxed. Alot of people are telling me I may need to do it again. |
|
|
|
|
synzzzer
Joined: 10 Feb 2006
Posts: 1368
Location: Lutz, Fl.
|
| Posted:
Thu Feb 07, 2013 4:02 pm |
|
| I M Evil wrote: |
| EMGs does not squeal |
They are not wax potted, but they are epoxy potted. (Inserts smiley face here.) |
_________________
1998 Dean Select ML
Dean Hardtail
Luna Andromeda
Epi Les Paul
4 Strats
BC Rich Mockingbird Special
PMC/ Cort Archtop
Custom Neck-through hollowbody
Ibanez Artcore
Walden D710
Gitane Gypsy Jazz
Sunn Alpha 212R
Genz-Benz El Diablo
Univox 1051 |
|
|
|
I M Evil
Joined: 04 Apr 2005
Posts: 2431
Location: Midwest, Sweden
|
| Posted:
Thu Feb 07, 2013 8:32 pm |
|
| synzzzer wrote: |
| I M Evil wrote: |
| EMGs does not squeal |
They are not wax potted, but they are epoxy potted. (Inserts smiley face here.) |
same result |
_________________
"Spend less time chasing tones and more time just playing music." - Marty Friedman |
|
|
|
Jerkov
Joined: 17 Jan 2011
Posts: 991
Location: Arid-Zona!
|
| Posted:
Thu Feb 07, 2013 10:29 pm |
|
I installed two of the chrome covers from greasy groove as well ..
Had the same problem.
Ended up learning how to melt wax into the covers and the squeaks went away.
Its really easy and cheap to do...didn't take five minutes.
Problem solved.
Youtube is the place to learn how.
Basically you melt wax until its liquid. Pot on the stove, whatever.
Fill your upside-down cover over half way full and immediately shove your pickup into it.
Hold it there until it cools into a solid.
It should gush out everywhere and coat the entire pickup. Bottom tootoo
Then just stick it back in the guitar.
I've also had to solder the cover to the back of the pup to ground out out better |
_________________
DOA#11-02369 |
|
|
|
Aceman
Joined: 14 Oct 2009
Posts: 1190
Location: Safety Harbor, even closer to the Motherland of Dean than BTMN
|
| Posted:
Sat Feb 09, 2013 3:49 pm |
|
Needs wax potted. |
_________________
DOA# 9 02164
 |
|
|
|
|
|
